The RO60HiS is a full sized 60 gallon per day Hi-S High Silicate Removal RO unit with clear canisters. Full size units provide better pre-filtration and less chance of membrane fouling. This unit will remove an average 97-99% of tap water contaminants. The RO60HiS includes a 60 gallon per day Hi-S membrane, a CF1M 1 micron sediment pre filter, a CFCE solid carbon block filter, a 3/4 inch garden hose adapter and 6 feet of yellow, blue and orange tubing.

This unit can be run on ANY water system, well or city.

We recommend adding a Flush Kit to your system to extend your membrane life, particularly in hard water conditions.

Specifications:
Length: 10"
Width: 5 ¾ "
Height: 15 ½ "
Dry weight: 10 lbs
Optimal input water temp: 70-77°F, 21-25°C
Optimal PSI: 65
Optimal Total Dissolved Solids: <200 ppm
Input water type: Any water system
Membrane type: Hi-S
Rated Gallons Per Day: 60
Waste to Product ratio: 35 gpd = 4g waste to 1g product, 60 gpd = 3g waste to 1g product
Inhibiting/Damaging tap water chemicals: Iron, Calcium, Magnesium, Heavy Sediment
Prefilter media #1: CF1M: 10", 1µ string wound sediment filter
Prefilter media #2: CFCE: 10", 10µ solid block carbon filter
Post filter media: N/A
Supplied input water adapter: GHF, ¾" standard thread
Tubing type: ¼" pressure tubing
Filter change times: NOTE: change times are varied depending on the tap water conditions. Stated times are an average: Hi-S membrane: 3 to 5 years, CF1M: 6 months, CFCE: 3,500 gallons or 6 months.